The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (http://www.bbq-brethren.com/forum/index.php)
-   Q-talk (http://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   bbq logo sticker for the smoker (http://www.bbq-brethren.com/forum/showthread.php?t=153046)

Resesgrill 02-03-2013 02:37 PM

bbq logo sticker for the smoker
 
can anyone tell me where i can get a logo sticker made for my smoker?

J'ville Grill 02-03-2013 03:02 PM

I would think your local printing shop could do it.

Carbon 02-03-2013 03:21 PM

I installed a generic bbq tin sign on mine....

http://i31.photobucket.com/albums/c3...ps016dcfd8.jpg

Resesgrill 02-05-2013 08:16 AM

ok thanks ill try kinkos

Desert Hawg 02-05-2013 08:29 AM

Are you asking as you already have a logo or are you asking where you could get one made? If asking where to get one made you could start here, http://barbecuelogos.com/

BayoustateBBQ 02-05-2013 08:31 AM

Forget kinkos, you need a metal based decal They just do vinyl to my knowledge

Toney Marconi 02-05-2013 08:34 AM

I just used a pop rivet tool and installed a beer sign on my UDS. You could easily find a generic BBQ metal sign on amazon or eBay and do the same.

http://i17.photobucket.com/albums/b5...6A8286F36B.jpg

Lazybones 02-05-2013 08:38 AM

I had the shop that does my tshirts make me some vinyl stickers for mine. This won't work unless your cooker is insulated, though.

http://i154.photobucket.com/albums/s...EC7C6E1E57.jpg

NeoTrout 02-05-2013 10:37 AM

Screw Kinkos. Find someplace that does graphics for vehicles. :cool:

Resesgrill 02-05-2013 07:04 PM

ok yes i had barbequelogo.com make my logo already ,i just needed a sticker for my smoker

Smoking Westy 02-05-2013 07:15 PM

My uncle made me these...

http://i155.photobucket.com/albums/s...ps5f284b9f.jpg

Now I just need an insulated cooker to put them on!

Freddy j 02-05-2013 07:27 PM

Quote:

Originally Posted by Carbon (Post 2353310)
I installed a generic bbq tin sign on mine....

http://i31.photobucket.com/albums/c3...ps016dcfd8.jpg

Too cool!

Garrett 02-05-2013 08:48 PM

1 Attachment(s)
I got a friend with a CNC plasma cutter to cut this out for me.Attachment 75469


All times are GMT -5. The time now is 03:47 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
2003 -2012 BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.