The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (http://www.bbq-brethren.com/forum/index.php)
-   Q-talk (http://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   250 gallon Cooking trailer rebuild by TQ and Tyler (http://www.bbq-brethren.com/forum/showthread.php?t=152890)

TuscaloosaQ 02-01-2013 09:02 PM

250 gallon Cooking trailer rebuild by TQ and Tyler
 
A gentleman approached me about redoing his cooking trailer. Basically he had a direct cook cooker that was made out of very thin metal (16gauge) We talked and decided to take a 250 gallon tank and build him a direct cook cooker to be used with charcoal and wood. I generally do not like to work on a trailer that has already been built because they are not up to my standards. I basically redid most of the trailer when I got into to it I could not stop just could not let it leave, unless it was up to my standards and I try and set em high. Me and Tyler are the only ones that touch our products and that is just the way it is. The challenge for me initially was I wanted to leave both endbells on and have acess to the grates and in doing so let it look like a craftsman did it. So we came up with a plan

Original setup

http://i1053.photobucket.com/albums/...loosaQ/497.jpg


http://i1053.photobucket.com/albums/...loosaQ/499.jpg


The beginning of the revamp

http://i1053.photobucket.com/albums/...loosaQ/519.jpg

the back had wood in it I foud out why it was covering up a mess

http://i1053.photobucket.com/albums/...loosaQ/519.jpg

starting the charcoal grate access

http://i1053.photobucket.com/albums/...loosaQ/511.jpg


http://i1053.photobucket.com/albums/...loosaQ/522.jpg


we bought this new machine last week and Tyler finaaly let dad use it

[IMG]http://i1053.photobucket.com/albums/s471/TuscaloosaQ/500.jpg
[/IMG]

some welds with the new mig


http://i1053.photobucket.com/albums/...loosaQ/517.jpg


http://i1053.photobucket.com/albums/...loosaQ/523.jpg


the top grate is fixed and only 14 inches wide

http://i1053.photobucket.com/albums/...osaQ/005-1.jpg

charcoal and wood access

http://i1053.photobucket.com/albums/...loosaQ/007.jpg


stack damper we made the stack look like a chimney

http://i1053.photobucket.com/albums/...loosaQ/013.jpg


http://i1053.photobucket.com/albums/...loosaQ/013.jpg


before i painted it


http://i1053.photobucket.com/albums/...loosaQ/012.jpg


finished product


http://i1053.photobucket.com/albums/...osaQ/004-4.jpg


http://i1053.photobucket.com/albums/...osaQ/010-3.jpg


http://i1053.photobucket.com/albums/...osaQ/012-1.jpg

Bobby bobo was happy so I was happy

http://i1053.photobucket.com/albums/...loosaQ/019.jpg


I always show what Tyler is up to.... Still building bumpers we help each other out kind fun

http://i1053.photobucket.com/albums/...loosaQ/005.jpg

Tyler spraying abumper

http://i1053.photobucket.com/albums/...loosaQ/526.jpg






http://i1053.photobucket.com/albums/...loosaQ/007.jpg



http://i1053.photobucket.com/albums/...osaQ/005-1.jpg


http://i1053.photobucket.com/albums/...loosaQ/486.jpg


http://i1053.photobucket.com/albums/...loosaQ/491.jpg


we built boxes and bumper for this truck


http://i1053.photobucket.com/albums/...Q/IMG_1507.jpg


http://i1053.photobucket.com/albums/...Q/IMG_1514.jpg


just another bumper


http://i1053.photobucket.com/albums/...Q/IMG_1502.jpg


This what Ashley Tyler girlfriend does while we work

http://i1053.photobucket.com/albums/...Q/IMG_1569.jpg..

that is a big deer for around here.


http://i1053.photobucket.com/albums/...Q/IMG_1573.jpg

Thanks for looking, thanks to those who are praying for my wife, she starts chemo next thursday..... Keep on praying!!!!!!!!!!!!!!!!! And God bless... I hope I did not get the pics out of sequence I struggle with a computer give me a welder and I do just fine LOL!!!!!

A fellow brethern asked about a pig so we cut this out and sent to him, not bad for freehand on 16 gauge stainless


http://i1053.photobucket.com/albums/...loosaQ/006.jpg

Mattmo 02-01-2013 09:38 PM

Awesome pictures! That's a monster deer anywhere! I see some backstraps on the table....mmmmmm

Pitmaster T 02-01-2013 10:01 PM

Jesus Christ I think you may be one of the best welders I have seen on here since that dude welded that boat a while back. A whole damn boat. I forget who that was. Nice design!

jeffjenkins1 02-01-2013 11:04 PM

Nice job and nice welds too.

Jeff

Midnight Smoke 02-01-2013 11:09 PM

You do excellent work, something to definitely be proud of.

LoneStarMojo 02-02-2013 12:42 AM

Since about Sept/Oct I've had so much to do here @ home and I've missed putting in my usual time here with the Brethren. You're family is now on my prayer list.

I have missed seeing these builds. I just wish I lived closer. I need one of them bumpers (the word "bumper" just does not seem to do his designs justice) for my FJ Cruiser. But I'd want it to be aluminum. I weld some. I do ok. You 2 are in a league of your own. :clap2:

Hoss 02-02-2013 12:58 AM

MMMMMPRESSIVE!!!! Prayers and Best Wishes for ALL !!!

TuscaloosaQ 02-02-2013 06:18 AM

Thanks for all of the nice comments, we truly try and put 100% in all we do!!!! We have a couple of new builds to start soon, they are ground up build that is what I like. Pitmaster T the guy that built the boat was my son Tyler and we use it
all the time ie has not sunk yet!!!!! LOL
Hoss
LoneStarMojo congrats on kicking our Butts this year!!!!!!

Thank you guys for the continued prayers

cowgirl 02-02-2013 11:42 AM

Great looking cooker Paul, You do quality work for sure!!
Awesome buck too! I enjoy seeing other women who like to hunt too. Nice to know I'm not alone. :mrgreen:

Sending thoughts and prayers your way...

DubfromGA 02-02-2013 11:50 AM

Prayers for your wife.


Outstanding job on the pit. It looks awesome.

Great buck and beautiful young lady with it.

TuscaloosaQ 02-02-2013 04:52 PM

cowgirl Thanks Jen for the Kudos Yea Sharon loves to hunt also. She did not get to hunt the last couple of weeks due to the medical procedure she had before her first Chemo Thanks for theprayers


DubfromGA Thanks for the continued prayers

bbqwilly 02-02-2013 06:33 PM

Great looking work as usual Paul.
If yall need any tips or pointers just let me know.:mrgreen:
We are praying for Sharon and you. Keep me posted buddy.

BBQ_MAFIA 02-02-2013 06:44 PM

Great looking build!

Smokin Patriots 02-02-2013 06:44 PM

You have definately got some skills!

Hoss 02-02-2013 08:10 PM

I have an offset on wheels(towable) that I would LOVE to let ya'll work your magic on.It is a good basic offset just needs major cosmetic work.Bad thing is it would cost me more in gas to tow it to Tuscsloosa than I paid for it! Ha!


All times are GMT -5. The time now is 02:07 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
2003 -2012 BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.