-   Q-talk (
-   -   install ? about WSM and Guru (

Hozman 01-09-2013 04:02 PM

install ? about WSM and Guru
For those who have installed Guru on to their WSM do you heat tape all intake holes or just the three where you hook up Guru?

Dirtbuddy 01-09-2013 04:07 PM

I just taped the ones that used the Guru adaptor, and closed the others.

Untraceable 01-09-2013 04:19 PM

all the cool kids put 3/4" sheet metal plugs in the other vent holes on the one your guru adapter is on.

caseydog 01-09-2013 04:25 PM

My iQue hooks up differently -- it covers all 3 holes on one daisy-wheel vent -- but I am getting some leakage on one of the two remaining bottom daisy-wheels. It is a tiny bit bent.

If your other vents leak, seal them. If not, let it ride, IMO.


MilitantSquatter 01-09-2013 06:23 PM


Originally Posted by Dirtbuddy (Post 2322881)
I just taped the ones that used the Guru adaptor, and closed the others.

same here

NorthwestBBQ 01-09-2013 06:48 PM$

scm1226 01-09-2013 07:08 PM

i was thinking about drilling a hole in the base of the WSM. Kinda like how they say to install on a kettle. What do you guys think?

Patrickkva 01-09-2013 07:57 PM


Originally Posted by MilitantSquatter (Post 2323048)
same here

One more ditto here. (Ok, so Tapatalk didn't quote your post) I also use the tape and close the other vents. Going to get those plugs though .....

BobM 01-09-2013 09:04 PM

This is what I did.

All times are GMT -5. The time now is 02:37 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
2003 -2012 BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.