-   Q-talk (
-   -   Does anyone have detailed plans for a propane tank conversion to smoker? (

Bob Loblaw 01-09-2013 01:04 PM

Does anyone have detailed plans for a propane tank conversion to smoker?
Hi there -

I've been searching the internet and havent found anything too detailed, but I'm looking for detailed plans on converting a 120 or 250 gallon propane tank into a offset smoker, preferably reverse flow.

Anyone out there have plans they'd like to share. I'd be very grateful!

Thanks in advance.

Bludawg 01-09-2013 01:53 PM

AustinKnight 01-09-2013 02:26 PM

Here is a good place to start Reverse flow cooker painted and first cook K.A.M made a real nice one, I plan to use it as a reference when I build my 500gal, good luck feel free to share some pic brotha:thumb: is another good place to lurk around. What are some plans you have for yours?

What I will build.

I have a 2006 16'' Tandem trailer $700 bucks on CL and what I need is everything else like 500g cost me $75 bucks, insulated fire box steel is what cost and 10'' steel pipe stack, expanded metal, angle iron $8 bucks old bed frames from the dump all totaling in at $1,000 to 1,200 if I do reverse flow or just tuning plates. I would already have this moving if it wasn't for my company giving me the whole month of December off thank god for my savings I had to build this cause I got to dip into those for all my bills, presents etc.:shocked::mad2:

dkryzer 01-09-2013 02:31 PM

I'm currently using plans from to build my tank smoker. The plans are very detailed with every measurement you will need. They aren't free but very worth the price.

All times are GMT -5. The time now is 11:05 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
2003 -2012 BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.