-   Q-talk (
-   -   Raspberry Pi Heatermeter :-) (

willbird 10-23-2012 09:53 AM

Raspberry Pi Heatermeter :-)
Well I have all the parts on the way, will do a couple teaching solder kits first to get some of my mistakes out of the way first :-).

Most everything should be here this week. I just bought the rPi on Amazon, it is only an extra $10 to do so....vs getting in line and waiting to be told you order or some such stuff.


willbird 10-24-2012 10:49 AM

rPi has landed, ordered Saturday, arrived Wednesday.

mrcranky 10-26-2012 10:38 AM

Looking forward to seeing how this goes. Be sure to post some pictures & (if you have time) a tutorial!

Drunk Monkey 10-26-2012 12:29 PM

Good luck, I am interested in seeing how this goes.

willbird 10-29-2012 11:07 AM

OK I flashed the card with the openWRT image, and with a little help was able to get WIFI setup. Still waiting on some solder and a few other things to come via Dropped into my "local" Radio Shack Saturday...well TRIED but it is GONE. Once the solder gets here, I have a few "learn to solder" kits from Ramsey Electronics to do...then it is onto the heater meter board.

But setting up the Wifi was probably the most difficult part really, and that is DONE :-).

willbird 11-12-2012 09:43 AM

Just a minor update, did my "learn to solder kits"....should be able to tackle the heatermeter now :-).

All times are GMT -5. The time now is 09:52 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
2003 -2012 BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.