The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (http://www.bbq-brethren.com/forum/index.php)
-   SlamDunk Productions (http://www.bbq-brethren.com/forum/forumdisplay.php?f=102)
-   -   New! Food grade Automatic Injectors (http://www.bbq-brethren.com/forum/showthread.php?t=128873)

Slamdunkpro 03-23-2012 01:26 AM

New! Food grade Automatic Injectors
 
Here they are. We've worked with a manufacturer to upgrade 2 automatic injectors (squeeze cockers) with all food grade construction, medical grade silicon pick up tubes and stainless steel side port injector tips. Other injector tips are in the works. These units will cut your injection times in half or more and make it easier to get more even injection distribution at the same time.

We offer 2 models:
The 20ml Injector
http://www.mabbqa.com/Resources/20cc-draw-injector.jpg
Durable all metal construction (except for the barrel tube and pickup) and fully serviceable. Up to 20ml of injection with every squeeze. 1/4" draw tube and large check valves allow for injections with small particulates to pass through (depending on needle size). You can push a lot of fluid with this beast.

I did a lot of research and many of the disposable drenchers out there have a fiber material plunger backer which can harbor bacteria. This unit is constructed with a double silicone O ring system for a good seal with no contamination risk. I'll post a video of it in action shortly.

The 5ml Injector
http://www.mabbqa.com/Resources/5cc-draw-injector.jpg
Smaller, lighter, with a 5ml per squeeze capacity, this unit can still deliver a load of injection in a short period of time. This unit has a light plastic frame and is slightly smaller. Still 100% food grade materials including a silicone pick up tube. This injector will draw and push viscous injections such as Butcher's, Kosmo's, and FAB but due to the small check valves your injection must be particulate free.

Both injectors are in stock and shipping right now at the MABA store.

Any questions, fire away.

smokinit 03-23-2012 09:26 AM

Sweet lookin

Jarhead 03-23-2012 09:48 AM

@SlamDunk. Are there optional needles available?
Thanks

Slamdunkpro 03-23-2012 11:52 AM

Quote:

Originally Posted by Jarhead (Post 1989639)
@SlamDunk. Are there optional needles available?
Thanks

They both use a standard leur lock connector.

It comes with a 14 gauge 2.5 inch double side port injector. Right now I can offer a 12 gauge 4 inch reusable and a 14 gauge 4 inch reusable. I'll have pricing up on those shortly. I'm working on other needle options.

What options would you like to have?

trohrs123 03-23-2012 12:34 PM

ordered mine this AM...cant wait!!:clap2:

RX2006JE 03-23-2012 12:39 PM

I would like to see a longer injection needle with a closed pointed end with multiple holes in the needle up the sides like the Bayou Classic

Slamdunkpro 03-24-2012 09:31 PM

Quote:

Originally Posted by RX2006JE (Post 1989871)
I would like to see a longer injection needle with a closed pointed end with multiple holes in the needle up the sides like the Bayou Classic

We are in the process of prototyping 2 of this style right now. A 4mm x 6.5 inch pencil point (sharp) with multiple side ports very similar to the injection needle found on the F Dick pump injector and a smaller 14 gauge x 5 inch multi side port in either a pencil (sharp) or bullet (rounded) point. We should have prototypes in about 2 weeks.

wheelterrapin 03-29-2012 09:51 PM

Just ordered the 20CC injector and will be anxiously awaiting the new needles.


Quote:

Originally Posted by Slamdunkpro (Post 1991305)
We are in the process of prototyping 2 of this style right now. A 4mm x 6.5 inch pencil point (sharp) with multiple side ports very similar to the injection needle found on the F Dick pump injector and a smaller 14 gauge x 5 inch multi side port in either a pencil (sharp) or bullet (rounded) point. We should have prototypes in about 2 weeks.


RX2006JE 04-20-2012 12:00 PM

Any news on different injection needles

SmokeInDaEye 04-20-2012 12:34 PM

I got the smaller one a couple weeks ago. Going to try it out tonight on some pork butts.

cowboyupbbq 04-20-2012 01:10 PM

Injector
 
Does the small one do ok with a creole injection that has ground pepper?

Eric

Slamdunkpro 04-22-2012 04:40 PM

Quote:

Originally Posted by cowboyupbbq (Post 2023017)
Does the small one do ok with a creole injection that has ground pepper?

Eric

Sorry, no. You can't have any particulate in suspension for the small one. Even the large one has limits on the amount and size of particulate in solution. The check valves have to be able to seat cleanly.

Dr_KY 04-22-2012 08:04 PM

Have one in the post. :)

Slamdunkpro 04-22-2012 08:22 PM

Quote:

Originally Posted by Dr_KY (Post 2026298)
Have one in the post. :)

From us?

Dr_KY 04-22-2012 08:33 PM

No but from reading the above I'm already considering the upgrade to yours.


All times are GMT -5. The time now is 04:11 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
2003 -2012 BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.