The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (http://www.bbq-brethren.com/forum/index.php)
-   Q-talk (http://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   Started my "Northwoods Amateur" build tonight (BWS Pro Clone) (http://www.bbq-brethren.com/forum/showthread.php?t=123907)

TTNuge 01-10-2012 08:32 PM

Started my "Northwoods Amateur" build tonight (BWS Pro Clone)
 
Well after drooling over many different smokers including a few BWS Fatboys, Stumps, some clone builds and many more I decided to bite the bullet and try to build one myself. A lot of the inspiration comes from Winemaster and his clone, another BWS build I found at a different site as well as Ryan (speers90) and his build since he lives less than a mile from me and I got to see a bit of the action with his build thanks to this site.

I first started by buying my wife a Welder for Christmas. I got away with it and she actually liked it as she has mentioned an interest in welding in the past. I originally got a Hobart 140 but after some roundy round and some "advice" from my Dad who also was interested in a wire feed welder to go with his stick unit I ended up upgrading to a Hobart 190 with spool gun. I don't plan on using the spool gun for this build but I figured what the heck, why not get it anyways.

Then I made a trip to a local steel dealer and picked up a load of steel. Between the tubing and sheets it was just over 700#s so it's going to be a monster. I started with the thought of putting it on wheels but I may just end up with a dedicated trailer.... I'll figure that out later.

The unit is going to be just over 5' tall on wheels, 28" wide and 27" deep. The smoking chamber itself is going to be 48"x24"x24" with at least 5 shelves and at least 12 shelf locations. I have a 1/4" heat diffuser plate to go above the fire box and it will be set up with an intake dedicated for Stoker use.

Not much to look at right now but considering I only had a few hours, I have never welded two pieces of metal together before and I was alone I was pretty happy with my progress. I'll only get a few nights a week to work on it and I'll be losing a couple weeks the end of this month to business travel but I hope to have it done soon so I can practice and enter a few comps this spring with it.

http://images12.fotki.com/v335/photo...MG_4084-vi.jpg

http://images57.fotki.com/v300/photo...MG_4085-vi.jpg

Hopefully I'll have some more progress pics later this week. Also looking forward to my new Stoker w/25cfm fan to arrive, hopefully with the wi-fi code. :shock:

Thanks for looking,
Trent

Lazybones 01-10-2012 08:38 PM

Looks good to me!....I'm planning on starting a clone build pretty soon as well. Should be a fun project!

speers90 01-10-2012 09:16 PM

Alright!

Will work for bbq 01-11-2012 12:53 AM

Nice start :pop2:

WineMaster 01-11-2012 06:24 AM

Very cool. Looks good so far. Just make sure that a full size aluminum pan will fit on the racks. You wont regret that tip. Good luck. Keep us updated.

Dan

DaveMW 01-11-2012 06:45 AM

I look at these different build threads and shake my head at my lack of talent (and guts) to try building things like this. I look forward to following your progress.

Big George's BBQ 01-11-2012 07:41 AM

Sounds very interesting Keep posting your progress please

Cloudsmoker 01-11-2012 07:45 AM

My thoughts exactly. Thank God for these talented dudes.

TTNuge 01-11-2012 09:03 AM

Sitting here looking at my pics I realized I welded a cross bar on the top in the back where it should have been in the front. The one in back needs to be split for the exhaust to go up. Oh well, it can be cut to fit but I can't believe I did that and didn't realize until just now.

Reserve those "talented" comments until the end, we don't know how this is going to come out yet! :) Like I said, this is pretty much the first time I've ever picked up a welder, I've got more guts than brains I'm sure.

TTNuge 01-16-2012 08:26 PM

Finally got a bit more time to get over and work on the smoker again. Slow going so far but that's what happens with a demanding job, a wife and three kids. And now I leave on Sunday for 2 weeks in Chicago so progress will be slow once again.

Got the two cross braces on the front of the smoker, one across the top and the lower one that will be for the top of the firebox door and the bottom of the meat compartment door. Also welded in a couple angle brackets and finally the 1/4" diffuser plate that separates the firebox from the smoke chamber. Was pretty happy with the fit and the weld, first time welding 1/4" plate and there was a lot to weld. Welds may not look professional but they'll do the job.

Front View:

http://images34.fotki.com/v1077/phot...MG_4086-vi.jpg

Side View:

http://images33.fotki.com/v1186/phot...MG_4088-vi.jpg

Close up of the diffuser plate:

http://images51.fotki.com/v102/photo...MG_4087-vi.jpg

Thanks for looking.

Trent

speers90 01-17-2012 12:40 PM

Looking good!

Full Draw BBQ 01-17-2012 01:57 PM

LOVE these builds!!!!!! Thanks for posting the updates! :clap:

HB-BBQ 01-17-2012 02:32 PM

Looks good so far. I too lack welding skills but am always intersted in these homemade smoker builds.

KingRanch450 01-17-2012 03:26 PM

Keep posting pics of your progress. Love these build threads :thumb:

TY~DY 01-17-2012 03:30 PM

Subscribed! Nothing like a good build thread to inspire!


All times are GMT -5. The time now is 01:00 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
2003 -2012 BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.