The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (http://www.bbq-brethren.com/forum/index.php)
-   Q-talk (http://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   Used the New Maverick ET-732 (http://www.bbq-brethren.com/forum/showthread.php?t=110275)

Pappy 07-02-2011 04:06 PM

Used the New Maverick ET-732
 
Worked great! Easy to use. Smoked 4 butts.
http://i1117.photobucket.com/albums/...2/IMG_3360.jpg
http://i1117.photobucket.com/albums/...2/IMG_3359.jpg
http://i1117.photobucket.com/albums/...2/IMG_3332.jpg

5-0 BBQ 07-02-2011 04:50 PM

Great thermometer!

thunderwagn 07-02-2011 06:07 PM

What do you have your probes going thru?? Me like.

Pappy 07-02-2011 10:22 PM

Quote:

Originally Posted by thunderwagn (Post 1695102)
What do you have your probes going thru?? Me like.


Got that idea from BluDaug. It works nice and looks professional.
Home Depot was about $3.50

UF watertight conduit nut in the side of mine it has a rubber grommet in The middle so your leads don't get chafed. they cost about a buck in the electrical section at the building centers.
It can be seen above the shelf;

I plan on adding one to the offset smoker too.
http://i968.photobucket.com/albums/a...UDS/uds016.jpg

http://i968.photobucket.com/albums/a...tconnector.jpg

Redwingsfn31 07-02-2011 11:33 PM

Is it really that different from the ET-73?

Boshizzle 07-02-2011 11:35 PM

I'm glad it worked for you. My ET-732 was a total waste of money. The older ET-73 I have is a much better product, IMO.

thunderwagn 07-03-2011 08:31 AM

Quote:

Got that idea from BluDaug. It works nice and looks professional.
Home Depot was about $3.50

UF watertight conduit nut in the side of mine it has a rubber grommet in The middle so your leads don't get chafed. they cost about a buck in the electrical section at the building centers.
It can be seen above the shelf;
Thanks Pap! I will be doing the same. Really like the looks of it. I have mine going thru like a thermal couple adapter and it looks lame. Your method looks nice and beefy. Thanks again...

Pappy 07-03-2011 01:09 PM

7/8" dia. hole. The inside will be about 7/16" opening. You will like it.

Blackened 07-03-2011 01:26 PM

http://i1117.photobucket.com/albums/...2/IMG_3359.jpg

You should be able to hang the receiver on you therm. dial if you turn the stand around

http://img25.imageshack.us/img25/463...0029761784.jpg

Blackened 07-03-2011 01:29 PM

Quote:

Originally Posted by Redwingsfn31 (Post 1695413)
Is it really that different from the ET-73?

The range is amazing on the 732. I only got about 30' from the 73, I've gone well over 100' with the 732 and never lost the signal. and if you were to, it's got an audible warning to let you know.

chrischandler71 07-03-2011 03:05 PM

I am going to use mine tonight for the first time on a butt! Plan on getting up at 3am and getting smoker started, and meat on by 4am

Sent from my DROIDX using Tapatalk

Vince B 07-03-2011 03:14 PM

Quote:

Originally Posted by Boshizzle (Post 1695418)
I'm glad it worked for you. My ET-732 was a total waste of money. The older ET-73 I have is a much better product, IMO.


What problems have you had or how is the et73 different from the 732? I have the 73 and have been thinking of getting the new 732 because the range on mine blows! TIA Vince

bmanMA 07-03-2011 03:22 PM

i think i am getting the 732 for me b-day. cannot wait. I burned my 73. literally.
It worked fine, but the whole not telling me that it was outta range kinda sucked.
If that was the only mod, I'd buy it. But there are more mods....

Pappy 07-03-2011 03:27 PM

Quote:

Originally Posted by Blackened (Post 1695961)

You should be able to hang the receiver on you therm. dial if you turn the stand around

http://img25.imageshack.us/img25/463...0029761784.jpg

Thanks, I was afraid it might get hot. Brand new. Waited all year to get one. I hung it on the chain link fence.

BTW Nice lookin Flat Top UDS

Plitz 07-03-2011 03:45 PM

I'm loving mine...I just wish the probe cables where longer!! I can't figure out a good way to hang it on my WSM,I just run them under the lid and duct tape it to a railing nearby!!! lol


All times are GMT -5. The time now is 09:19 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
2003 -2012 BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.