The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (http://www.bbq-brethren.com/forum/index.php)
-   Q-talk (http://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   my new twins PID control W/pron (http://www.bbq-brethren.com/forum/showthread.php?t=104013)

mgp03051 04-06-2011 05:53 PM

my new twins PID control W/pron
 
4 Attachment(s)
We rigged up this PID controller to run our 2 UDS's going to tune them tomorrow and put a couple turkeys in the Uds's this weekend. We mounted the fans internaly so that they wouldn.t be expossed to rain and the housing is pretty much water tight. gotta think of a cool name for it any suggestions?

BRBBQ 04-06-2011 06:39 PM

Interesting, I'd add a few washers on the legs just to get maxium intake airflow

mgp03051 04-06-2011 08:32 PM

yeah thats the only thing left to do I might just make a bracket for it and hanging from my shelf.

mgp03051 04-06-2011 11:12 PM

It has on/off swithches for each PID and each 10 cfm Fan, Low temp alarm Piezio buzzer so we know when the fire is going out, 25 watt 12vdc power supply, and a 1/4 inch jack in the back so it will run of 12vdc if we have no power. only other thing i'm going to add is an on/off switch for the Alarm to silence it.

stewartr002 04-06-2011 11:16 PM

How about "R2-BQ"?
Randy

swamprb 04-06-2011 11:18 PM

I wish I had those skills!

Nice work, seeing a lot of PID's around.

Sammy_Shuford 04-06-2011 11:19 PM

Nice.

mgp03051 04-06-2011 11:35 PM

Quote:

Originally Posted by stewartr002 (Post 1603100)
How about "R2-BQ"?
Randy

Thanks Randy that just might stickk!!!

Yakfishingfool 04-07-2011 08:31 AM

R2-Blow You

MrOneEyedBoh 04-07-2011 10:08 AM

Are there any plans floating around on how to make one?

Dr_KY 04-07-2011 12:26 PM

Quote:

Originally Posted by mgp03051 (Post 1602812)
gotta think of a cool name for it any suggestions?


Dude drop back to the eighty's:becky:

Space Invaders


Here is your matching comp sofa.
http://zedomax.com/blog/wp-content/u...ch-590x389.jpg

nicksmurf111 04-07-2011 06:52 PM

What is the water tight fitting for the cord called? Also, what size box is that? I picked up deep 4x4x4" box and it's much too small.

righteousdog 04-07-2011 07:47 PM

what are you going to use for the lb to smoker connection?

Quote:

Originally Posted by nicksmurf111 (Post 1603757)
What is the water tight fitting for the cord called?

it's a cord grip. we use the same one's at work but since i'm not there i can't tell you the supplier... maybe harting or appleton.

mgp03051 04-07-2011 08:23 PM

Quote:

Originally Posted by MrOneEyedBoh (Post 1603315)
Are there any plans floating around on how to make one?

all that i have is the hand drawn Schematic that I drew up. I could post if you like.

speedrcer1 04-07-2011 08:29 PM

Quote:

Originally Posted by mgp03051 (Post 1603844)
all that i have is the hand drawn Schematic that I drew up. I could post if you like.

Yes please!
:thumb:


All times are GMT -5. The time now is 05:50 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
2003 -2012 BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.