The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (http://www.bbq-brethren.com/forum/index.php)
-   Q-talk (http://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   Bayou Classic SP10 Flame Spreader / Diverter (http://www.bbq-brethren.com/forum/showthread.php?t=101654)

Northwoods Smoke 03-02-2011 08:58 AM

Bayou Classic SP10 Flame Spreader / Diverter
 
I have a Bayou Classic SP10 that I have started doing some different cooking with (boiling pots of pasta, chineese wok cooking) and what I notice is the flame is super intense in the middle with very little 'spread' for heat to the outside of any pot, kettle, wok, etc.

I was wondering what ideas you would have to implement some type of flame spreader or diverter so that the flame is more uniform over a larger area. One of my main questions - What kind of materials would/should I use?

I have an stainless steel double boiler strainer (I own two) that I could hack up and suspend with brackets above the burner, but didn't know if the stainless would hold up under a direct and intense flame (an SP10 burner is rated at 185,000 SPU).

Obviously, Bayou makes other burners with better flame distribution, but I am on a budget and need to make the one I have just work better and more versatile.

Thanks in advance.

eddieh70301 03-02-2011 10:25 AM

what you have is a high pressure burner used for boiling. What you need is a low pressure burner if you will be using it to cook. You can pick up a low pressure burner for about $15 from your gas supply store, but you will also need a new jet and a orfice.

BBQ PD 03-02-2011 10:43 AM

A piece of 1/4" steel plate should do the job.

early mornin' smokin' 03-02-2011 12:05 PM

coffee can lids work great


All times are GMT -5. The time now is 11:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
2003 -2012 BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.