The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (https://www.bbq-brethren.com/forum/index.php)
-   Q-talk (https://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   reverse flow (https://www.bbq-brethren.com/forum/showthread.php?t=86659)

ChuckC 10-05-2010 08:04 AM

I have an idea for a heat exchanger directly above the point where the firebox enters the cooking chamber but below the reverse flow plate; a series of tubes that run through the cooking chamber, vented to the outside on one end and plumbed into the firebox as part of the air intake on the other.

When the valves are open they will draw air through the tubes and into the firebox perhaps dissipating some of the radiated heat from the firebox.

Going to work on it a bit today.


All times are GMT -5. The time now is 07:56 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.