The White Weber is Now Black!!
I guess I could have put this in my other thread, but since this was my first attempt at painting a grill I started a new one.
So I bought this Weber yesterday and the guy who sold it to me said he bought it already painted white (really off white by the time I got it). Pretty crazy since it looked bad. So I ran out today grabbed some high temp black paint and gave it a spraying. Keep in mind I'm no painter and did this fairly quick. But I think it looks a million times better. She won't ever shine again, but that is fine with me. Goodbye horrible white paint job. http://i1083.photobucket.com/albums/...Q/IMG_1364.jpg Hello mediocre black paint job :) http://i1083.photobucket.com/albums/...Q/IMG_1365.jpg Now a little flashback http://i1083.photobucket.com/albums/...Q/IMG_1359.jpg And finished. Well still gotta put the handles back on. Who's got links on how to make new wooden ones?? Though I'm not very handy. http://i1083.photobucket.com/albums/...Q/IMG_1367.jpg |
MUCH BETTER!! With a little elbow grease, some very fine grit sandpaper, and various polishing compounds, you may be able to wet sand it to a decent shine. I could be wrong, as I've never tried it with high temp paint.
As far as handles go...I made a lid handle out of some scrap hardwood. I just routed a dado, just wide and deep enough for the metal to sit into. Cut to length and width, softened the corners, and glued on a bottom piece using some CE glue. Surprisingly enough, it's held together for MANY long cooks. You could also go this route, http://store.weber.com/items/?pid=1300 Matt |
Quote:
|
Much better improvement. That white buffalo was a bit over the top... Handle? Maybe a piece of dowel or whack off the end of a broom handle, file & sand to your liking and then cut it in half. Cheers!!!
|
Hamiltont is spot on with his advice. Anything that is cooler to the touch than the metal will work. I've used antler and drumsticks to make handles for my NBBD.
If you want to try sanding, you'll need to start with at least 400grit wetordry paper, and keep going up. Get a foam pad, so the paper conforms to the shape of the kettle. If you're serious about polishing, give me a PM, and I'll tell you what I know. It's not a lot, but my drum kit really shines(I made it myself)!! Matt |
Quote:
|
Quote:
|
You could try some engine enamel from an auto parts store. They have a glossy black that might work well. I have had good luck with that engine enamel for painting UDS's and it usually goes on evenly with light coats.
|
Here's a link to instructions and diagrams on how to make your own weber wooden handles. http://www.virtualweberbullet.com/woodenhandle.html They are for the WSM but should be the same for a kettle.
|
So I fired it up with some wings and corn. Did a honey teriyaki marinade on the chicken.
Funny, as soon as I poured the chimney into the weber the rain started pouring outside. It rained the whole time, but it ran without a problem. Luckily I have a rain suit. http://i1083.photobucket.com/albums/...Q/IMG_1368.jpg Looking good. http://i1083.photobucket.com/albums/...Q/IMG_1369.jpg It was delicious. I love me some char on the chicken. I see a lot more grilling in my future. http://i1083.photobucket.com/albums/...Q/IMG_1371.jpg |
Whatever it looks like on the outside, looks like it works well on the inside! Maybe a UWB (ugly weber kettle)?:-D
|
Nice Job! Wings and Corn look great! It will only get better from here.:thumb:
|
All times are GMT -5. The time now is 02:18 PM. |
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.