The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (https://www.bbq-brethren.com/forum/index.php)
-   Q-talk (https://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   JB Weld (https://www.bbq-brethren.com/forum/showthread.php?t=279217)

LloydQ 02-29-2020 06:15 PM

JB Weld
 
Hello all. I was trying to rig up a poor man's Trompo, and I hit on metal kebab skewer and a cheap 9" cake pan. Would some JB Weld on the fire side of the pan prove toxic to me and my loved ones? Please consider your replies carefully. There is $4.50 riding on this....

frankenfab 02-29-2020 06:21 PM

Get it good and hot before cooking, and any volitales will be eliminated.

You can only burn so much ...anything before it is gone.

shares 02-29-2020 06:58 PM

Get you a $99 welder from Hatbor Freight. It's messy but it does a great job for the money. Don't put no epoxy in your cooker.

bluetang 02-29-2020 07:23 PM

I always have JB on hand and wouldnít use it for that. Itís bound to fail with direct heat like that. Shares HF idea ainít too shabby, a welder is always a good tool to have. If thatís not in the cards, run whichever die fits over the spit, and throw a couple of nuts and washers on it.

Shadowdog500 02-29-2020 07:43 PM

JB weld tastes good if you smoke it right! LOL!

All joking aside, what is a trompo? If I knew what it was maybe I could come up with a better solution than JB weld.

I believe that James Kilroy lives in Vicksburg. he has a fab shop and a YouTube channel. perhaps he could Tig it for you cheap. https://youtu.be/uPAk3Hbrdvs

Rusty Kettle 02-29-2020 08:41 PM

https://www.homesteadingtoday.com/th...estion.563793/

Answer is surprise yes it is food safe and they make a high heat one that might be better.
Read this page lol. I am shocked it is ok.

Rusty Kettle 02-29-2020 08:51 PM

https://jbweld.zendesk.com/hc/en-us/...and-food-safe-

Here is the direct link. The other forum someone copied the answer.

LloydQ 02-29-2020 10:11 PM

Quote:

Originally Posted by Shadowdog500 (Post 4277711)
JB weld tastes good if you smoke it right! LOL!

All joking aside, what is a trompo? If I knew what it was maybe I could come up with a better solution than JB weld.

I believe that James Kilroy lives in Vicksburg. he has a fab shop and a YouTube channel. perhaps he could Tig it for you cheap. https://youtu.be/uPAk3Hbrdvs

A Trompo is a spindle on a plate, basically.

Shadowdog500 02-29-2020 11:04 PM

Quote:

Originally Posted by LloydQ (Post 4277802)
A Trompo is a spindle on a plate, basically.

Thanks, I didnít know what it was.
I assume you want to make one like this.
https://cdn.shopify.com/s/files/1/26...g?v=1575298473


I wonder if you can use a slightly modified tiered serving tray.

Shadowdog500 02-29-2020 11:13 PM

Double post

LloydQ 03-01-2020 08:22 AM

1 Attachment(s)
Here is what I had in mind. Bend the eye of the skewer 90 degrees, poke the skewer through the pan, and seat the eye in a biob of JB Weld on the underside of the pan.

NC Mike 03-01-2020 08:50 AM

I used a steel rod from Home Depot. I threaded both ends with a threading die. Used a nut and washer on each side of the pan to lock it to the pan. I threaded the top of the rod so I can install a wing nut for a handle to let me lift the contraption. Have not used it yet but I think it will work.

Mark 03-01-2020 12:01 PM

Quote:

Originally Posted by Rusty Kettle (Post 4277753)
https://www.homesteadingtoday.com/th...estion.563793/

Answer is surprise yes it is food safe and they make a high heat one that might be better.
Read this page lol. I am shocked it is ok.

I think subjecting JB Weld to direct flame is an entirely different matter. you might want to verify.

The most common epoxy resins are based on reacting epichlorohydrin (ECH) with bisphenol A, resulting in a different chemical substance known as bisphenol A diglycidyl ether.

Bisphenol A is an endocrine disruptor. Endocrine disruptors are chemicals that can interfere with endocrine (or hormonal) systems at certain doses. These disruptions can cause cancerous tumors, birth defects, and other developmental disorders. Any system in the body controlled by hormones can be derailed by hormone disruptors.

LloydQ 03-01-2020 12:40 PM

Quote:

Originally Posted by Mark (Post 4278059)
I think subjecting JB Weld to direct flame is an entirely different matter. you might want to verify.

The most common epoxy resins are based on reacting epichlorohydrin (ECH) with bisphenol A, resulting in a different chemical substance known as bisphenol A diglycidyl ether.

Bisphenol A is an endocrine disruptor. Endocrine disruptors are chemicals that can interfere with endocrine (or hormonal) systems at certain doses. These disruptions can cause cancerous tumors, birth defects, and other developmental disorders. Any system in the body controlled by hormones can be derailed by hormone disruptors.

Holy $#!+

HouseDoc 03-01-2020 03:07 PM

Bend at loop and use a bolt washer nut combo to secure it though loop and bottom of pan. Fender washer should work


All times are GMT -5. The time now is 11:40 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.