The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (https://www.bbq-brethren.com/forum/index.php)
-   Q-talk (https://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   UDS build....opinions please!!! (https://www.bbq-brethren.com/forum/showthread.php?t=107168)

turkey_stalker 05-23-2011 11:52 PM

UDS build....opinions please!!!
 
I secured a drum today and am ready to start building. I have my measurements and before I drilled wanted to get other opinions.

Drum is 33.5 inches tall and has a 23 inch diameter. For the intakes I have measured 3 holes as best to the same distance apart as I can get. They are 2 inches of bottom of barrel and 1 inch diameter. I will place 3/4 Close pipe fittings in those. One of them will have a 3/4 ball valve and the other 2 have fitted tops. 3 inches of bottom barrel is my charcoal grate that my basket will sit on. I made the 20/20 basket from here and will sit that on the grate.

I want to add a second shelf so I measured 3 inches from top for 1st grate and 6 inches from top for second. That makes the second grate 24 inches from the charcoal grate. If second grate is used a weber 22.5 kettle dome will be used. Thermometer will be 1 inch below 2nd grate.

For the exhaust.....Have a lid with no holes. I am torn between adding a smoke stack or 8 1/2" holes for exhaust?

What say you???? Are my measurments okay?

PorkDork 05-23-2011 11:56 PM

The first issue of Smoke Signals Magazine (link up top) has a complete walk through with full sized pictures. Helped me a lot on my build.

turkey_stalker 05-24-2011 12:07 AM

Quote:

Originally Posted by PorkDork (Post 1651459)
The first issue of Smoke Signals Magazine (link up top) has a complete walk through with full sized pictures. Helped me a lot on my build.

Looks like I have to have adobe flash player and since I'm on my iPad I can't read it. I will take a look in the morning.

I did read this post today when measuring

http://www.bbq-brethren.com/forum/sh...t=if+a+redneck

AustinKnight 05-24-2011 12:13 AM

Quote:

Originally Posted by turkey_stalker (Post 1651463)
Looks like I have to have adobe flash player and since I'm on my iPad I can't read it. I will take a look in the morning.

I did read this post today when measuring

http://www.bbq-brethren.com/forum/sh...t=if+a+redneck

What can Droid do....:laugh:

Callahan-que 05-24-2011 12:56 AM

I wouldn't use a charcoal grate for the charcoal basket to sit on. What I would do is make a basket and mount it 2 1/2 to 3 inches off a pizza pan using 3 bolts for easy ash removal.

Callahan-que 05-24-2011 01:09 AM

Quote:

Originally Posted by turkey_stalker (Post 1651463)
Looks like I have to have adobe flash player and since I'm on my iPad I can't read it. I will take a look in the morning.

I did read this post today when measuring

http://www.bbq-brethren.com/forum/sh...t=if+a+redneck

Page 6 of that thread shows how to build the charcoal basket that I mentioned.

AUradar 05-24-2011 09:18 AM

so you only have 3" between the two grates? sounds minium. Might be better to put the top plate as close to the top of the drum as possible. Also, that tight of space is going to make getting the bottom rack in a pain

turkey_stalker 05-24-2011 09:29 AM

Quote:

Originally Posted by AUradar (Post 1651661)
so you only have 3" between the two grates? sounds minium. Might be better to put the top plate as close to the top of the drum as possible. Also, that tight of space is going to make getting the bottom rack in a pain

I wanted the bottom grate to be 24 inches from the charcoal basket. The 2nd grate is 3 inches from the top due to the way the barrel is constructed. There is a "roll" about 1.5 inches down from the top of the barrell and due to the curvature of the "roll", 3 inches down is about all I could do to make the bolts sit level.

If I was going to utilize both grates during a cook my thought process was to start the Butt on the lower grate. When I am ready to add...say chickens, I would pull the lower grate out...put the chickens on the other grate and swap positions. Chickens on the bottom and Butt on top.


All times are GMT -5. The time now is 04:19 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.