PDA

View Full Version : Lights for an upcoming trailer build..


Stu's Q
02-25-2010, 01:03 PM
Getting my new BBQ trailer in about a week or 2... 7'x14' w/ 7ft interior height. The trailer is unifinished (plywood walls, etc). I plan on insulating the walls with Refelctix insulation and then painting the walls and have an electrician friend of mine run a breaker box and lights/plug-ins, etc. I am wondering whats the best way to run lights on the ceiling of the trailer since its just a slightly rounded top with the ribs(frame). Any ideas/Do's and Dont's or pictures anyone can share?

Also, about the outlets.. thinking about running double outlets on the top of the walls on the side walls in the rear and front of the trailer, that way they are out of the way. Again, ideas/pictures of trailers?

Thanks...

Stu

moocow
02-25-2010, 02:25 PM
This is what I did.

Stu's Q
02-25-2010, 02:29 PM
Looks great Shane! How did you attach the light to the roof brace?

Stu

moocow
02-25-2010, 03:01 PM
Self tapping screws, it was pretty easy. Now it is insulated up there and looks even better.