Rib-O-Lator Rumors...

[KnucklHed BBQ]

A little bird told me that the ROL's to fit 22.5 Kettles and smaller diameter drums are sitting at the dock waiting to be cleared by customs...

Swamprb is the only one to have a 1-off custom ROL for his Kettle so far, Not for long Brian!!

[MilitantSquatter]

Where are they made ??

[NorthwestBBQ]

The far east but that's how B-O-B keeps costs down. It is designed and perfected in the good old USA and it's a great product.

[KnucklHed BBQ]

Where are they made ??

Unfortunately they've been manufactured overseas so far...
If the demand for them is great enough, perhaps they'll be made in the states someday. Starting out, they literally would have cost 4x as much for lesser quality materials if they had been made state side... :sad:
Didn't think there would be a whole lot of people lined up to drop that much cash on a ROL...

[swamprb]

Finally! That has got to be a load off B-O-B's mind.

I forsee a ton of Rib-O-Lator Pron........NATIONWIDE!!!!

I just cranked the Cajun Bandit up the other day with some Royal Oak Chefs Select Briqs with Guava & Orange for smoke.

http://i163.photobucket.com/albums/t310/swamprb/Ugly%20Drum%20Smoker/RibOLator/IMG_1505.jpg

http://i163.photobucket.com/albums/t310/swamprb/Ugly%20Drum%20Smoker/RibOLator/IMG_1507.jpg

http://i163.photobucket.com/albums/t310/swamprb/Ugly%20Drum%20Smoker/RibOLator/IMG_1508.jpg

Rib-O-Lator Locked and Loaded!

http://i163.photobucket.com/albums/t310/swamprb/Ugly%20Drum%20Smoker/RibOLator/IMG_1510.jpg

Jerk Wings, Klose and Simply Marvelous rubbed Legs

http://i163.photobucket.com/albums/t310/swamprb/Ugly%20Drum%20Smoker/RibOLator/IMG_1504.jpg

http://i163.photobucket.com/albums/t310/swamprb/Ugly%20Drum%20Smoker/RibOLator/IMG_1511.jpg

http://i163.photobucket.com/albums/t310/swamprb/Ugly%20Drum%20Smoker/RibOLator/IMG_1515.jpg

I love the Zebra stripes!
http://i163.photobucket.com/albums/t310/swamprb/Ugly%20Drum%20Smoker/RibOLator/IMG_1516.jpg

http://i163.photobucket.com/albums/t310/swamprb/Ugly%20Drum%20Smoker/RibOLator/IMG_1517.jpg

I better test out the new Kettle trays!!

[bbq lover]

sweetttttt b-o-b is the man he needs to keep his stuff in usa lol but all good if toyota is doing the job for him .. im sure the recall is near lol

[suprfast]

sweetttttt b-o-b is the man he needs to keep his stuff in usa lol but all good if toyota is doing the job for him .. im sure the recall is near lol

Not to correct you on this statement, but the recalls were done for cars that had the pedal assembly made in the USA. If the pedal assembly was made in JAPAN the recall didnt apply. My uncle is a mechanic for Toyota and they just fixed my brother in laws Corolla.

That being said...My wife just saw the ribolator and is FORCING me to buy one. Damn my wife:)
kris

[KnucklHed BBQ]

Not to correct you on this statement, but the recalls were done for cars that had the pedal assembly made in the USA. If the pedal assembly was made in JAPAN the recall didnt apply. My uncle is a mechanic for Toyota and they just fixed my brother in laws Corolla.

That being said...My wife just saw the ribolator and is FORCING me to buy one. Damn my wife:)
kris

Good thing we scrapped the whole idea of putting a gas pedal on the Rib-O-Lator... another disaster diverted!!

Your wife sounds like a horrible person. :biggrin:
Wish my wife forced me to buy BBQ goodies to fuel my obsession...

[suprfast]

Good thing we scrapped the whole idea of putting a gas pedal on the Rib-O-Lator... another disaster diverted!!

Your wife sounds like a horrible person. :biggrin:
Wish my wife forced me to buy BBQ goodies to fuel my obsession...

She benefits from me cooking. I do all the cooking, as i love it. She kicks back and reads a book. Good part is she does all the cleaning.

[KnucklHed BBQ]

She benefits from me cooking. I do all the cooking, as i love it. She kicks back and reads a book. Good part is she does all the cleaning.

lol, wife and I have had the same agreement for 13 years so far! Here's hoping I can keep her fooled for another 13! :biggrin:

[NorthwestBBQ]

Let the ROL UDS/WSM/Kettle revolution begin!

See Swamprb using his ROL here:

http://www.youtube.com/watch?v=jgOrDFhrmLA

[suprfast]

nice video.

Only comment is the missing bushing that should have been installed where the oil was sprayed. Im trying to find a picture of the bushing, but havent had any luck. Ill snap a pic of my rotisserie tomorrow if need be.(if this is your video).

Im going to pick one up. Ive had a regular rotisserie installed on my UDS for quite some time and always wanted something like this, then BAM there was my wish already made, taking my guess work out of making one.

[swamprb]

nice video.

Only comment is the missing bushing that should have been installed where the oil was sprayed. Im trying to find a picture of the bushing, but havent had any luck. Ill snap a pic of my rotisserie tomorrow if need be.(if this is your video).

Im going to pick one up. Ive had a regular rotisserie installed on my UDS for quite some time and always wanted something like this, then BAM there was my wish already made, taking my guess work out of making one.


I've got bushings, but I keep forgetting to put them on the rod.

[suprfast]

well then, forgedaboudit.

Looks good. Thanks to you and that vid, ill be getting my ribolator in the next few weeks. Anything special needed for the UDS(i already have a rotisserie on it)
kris

[NorthwestBBQ]

nice video.

Only comment is the missing bushing that should have been installed where the oil was sprayed. Im trying to find a picture of the bushing, but havent had any luck. Ill snap a pic of my rotisserie tomorrow if need be.(if this is your video).

Im going to pick one up. Ive had a regular rotisserie installed on my UDS for quite some time and always wanted something like this, then BAM there was my wish already made, taking my guess work out of making one.

Just shows how well the ROL runs with no bushings.

[Norcoredneck]

Will there be a Muffin pan rack in the near future?:biggrin: Myron Mixon signature model.

[mfdfyrecaptain]

will there be a muffin pan rack in the near future?:biggrin: Myron mixon signature model.

lmao

[noskos]

Wil some of those find there way to Europe?!?

[KnucklHed BBQ]

Anything special needed for the UDS(i already have a rotisserie on it)
kris

Nope! Since you already have a rotisserie in place, all you need to do is slide the rod out of the motor, remove the spit forks and slide on the ROL brackets. Ta-Da!

Will there be a Muffin pan rack in the near future?:biggrin: Myron Mixon signature model.

Funny you bring that up... we've had at least a dozen requests for the My-Mix-Mod tray, but they have all been from some farker that says he's down by Corona, Ca... not anyone you know, I'm sure... :biggrin:

[KnucklHed BBQ]

Wil some of those find there way to Europe?!?

Hmm, that's a tough one... Need to get you and Phoob to order at the same time and split freight or something...

If truely interested, PM me or Bob!

[sfbbqguy]

These units didn't come into port of Oakland did they...I saw a few cargo ships headed that way yesterday evening and swear on smelled like BBQ!

[swamprb]

Will there be a Muffin pan rack in the near future?:biggrin: Myron Mixon signature model.

You know me......

[jestridge]

I can see a lot of problems with that things. Over my lifetime I have work on a lot of carsoul ovens, when they hang up it aint a pretty sight , it aint if they hang up it when they hang up.

[dudz]

With the ROL does it still have to be 24" above the fire in a Uds? Also how easy would it be put The ROL in a Uds...any suggestions on how to do that (pictures)...i really like the rotersie mod.

[NorthwestBBQ]

dudz,

Did you see all of the pics and the video on page one of this thread?

Look here too:

http://www.bbq-brethren.com/forum/search.php?searchid=1085270

[suprfast]

dont have permission to that page.

[dudz]

Yah I did but...what ever ohh never mind

[KnucklHed BBQ]

I can see a lot of problems with that things. Over my lifetime I have work on a lot of carsoul ovens, when they hang up it aint a pretty sight , it aint if they hang up it when they hang up.

Thanks for your input!
I think you'll find that through the simplicity of the design, you'll rarely - if ever - have any problems.
As long as the food is equally distributed on the trays, there is adequate clearance and the brackets are clamped tight, you'll have no problems.

dont have permission to that page.

Yah I did but...what ever ohh never mind


You can always hit the main ROL site too - www.ribolator.com (http://www.ribolator.com/)

Ask Bob about the free trial!

Free trial to Rib-O-Lator means this - ABSOLUTELY FREE. Zero. Nada.
Order a ROL and use it for 30 days. If you don't like it, send it back.
We're pretty sure you're gonna love it though. When you decide that you need to keep it, give us a call back and pay for it. Doesn't get much easier than that.

[NorthwestBBQ]

Ryan, that is an amazing offer!

[suprfast]

Free for 30 days. NAH, i know ill like it. Next paycheck here i come.
kris

[KnucklHed BBQ]

http://i965.photobucket.com/albums/ae133/knucklhedbbq/Attaboy.jpg

You still get the cash back guarantee, whether you like it or not! :biggrin:

[suprfast]

are you a representative for the ROL?
Sorry, im not NEW, but still fresh here.

[KnucklHed BBQ]

are you a representative for the ROL?
Sorry, im not NEW, but still fresh here.

More like mis-representative! :wink:

B-O-B is my old man... kinda makes me obligated to pimp it!

If I'm doing a good job, could you email him and tell him so? Trying to get a raise. :biggrin:

[Forrest]

Spoke with Bob this morning and looks like the latest kettle shipment should be coming out of customs within 24 hours. Ferris wheel of meat, here I come!

[Rib-O-Lator]

The New Rib-o-lators on the shelf, and ready to live at your house. they are well trained and house broke, and they love meat.

[Rib-O-Lator]

More like mis-representative! :wink:

B-O-B is my old man... kinda makes me obligated to pimp it!

If I'm doing a good job, could you email him and tell him so? Trying to get a raise. :biggrin:

sorry, don't know you! now get back to work!

[willkat98]

sorry, don't know you! now get back to work!

That was funny.

Thanks!
.