PDA

View Full Version : questions about mikes silicone gasket mod


kcquer
02-19-2004, 02:10 PM
1 would this mod be best done on an unfired (new) rig? 2 is the appropriate goop automotive stuff in a toothpaste tube or home improvement stuff in a caulking gun tube? 3 how long has anyone had this in place and how does it hold up over time? newbie says thanks, scott

stlmike
02-19-2004, 03:07 PM
Scott,
I sent you an pm email, answering your questions. Let me know if I can help more and how it works for you.
StL Mike

jt
02-19-2004, 03:11 PM
How about sharing?

stlmike
02-19-2004, 03:15 PM
The gasket mod wasn't too difficult, but I can't stress enough to get the door where the sealant will go extremely clean. The how-to document is in the files section. Let me know if there are any questions.
Stl Mike

kcquer
02-19-2004, 07:15 PM
Mike, thanks for the idea and the advice, really appreciate both.

stlmike
02-20-2004, 03:48 PM
That is what it's all about!
Stl Mike

BBQchef33
02-20-2004, 09:45 PM
Wire wheel and electric drill = shiney bandera door.

smokeypig
02-21-2004, 12:06 AM
Mike - Could you forward any ideas to me.

I'm about to take an adventure in metal working on my BD :shock: . I'm planning on installing a heat baffle after I do the gasket thing. I lose a tremendous amount of heat and smoke around the doors and the hinges of my BD and I figure I"ve got nothing to lose.

Any ideas you might have would be greatly appreciated...

smokey...

Solidkick
02-21-2004, 07:20 AM
Smokey, I'm kinda answering for Mike here:

Gasket Mod
http://www.bandera-brethren.com/modules.php?op=modload&name=UpDownload&file=index&req=getit&lid=19

You can see pictures of the channelling here:
http://www.bandera-brethren.com/modules.php?set_albumName=album05&op=modload&name=gallery&file=index&include=view_album.php

This is the gasket mod I tried. I use 3/8" fireplace gasket rope and it was too thick. I would suggest using the 1/4" rope and don't put it on the hinge side. This is in case you decide the silicone mod isn't right for you.

stlmike
02-23-2004, 08:53 AM
Guys,
I can't stress enough to get the door clean before applying the sealant. The mod is still working for the guy I sold my Bandera to. I did use a wire wheel in a drill like Phis mentions, but I also followed up with the other means to ensure a clean door. I think that I answered all of the privates messages that I have received, but if I misssed someone, or if there are any more questions, let me know.
StL Mike