View Full Version : Starter/Accelerator For Wood Burning Smokers
04-06-2014, 07:15 AM
Consits of 10 CFM fan, AC/DC adapter which can hand tune speed of fan, universal fan adapter for Offset, Vertican cabinet, UDS, WSM, Ceramic pits
You can start a smoker by a piece of paper and match. You can also maintain temp. by tune speed of fan.And You can bring temp. to target very fast
the thread size is 3/4" inch. Size of flange is 81x50mm,which can be used by BGE directly
For different size of air inlet, you can cut the flange by scissors.
Ex-Works $29.90, Air mail cost $9.90, total $39.80
Promotional price to ID's here total $20
If you have interest to buy, please follow this post and I will PM you payment method.
04-06-2014, 07:45 AM
WSM is made in China. But I never have a WSM myself.
My question: how big is the size of small hole of air inlet.
Can the 3/4" thread be inserted into it.
04-06-2014, 10:00 AM
Now you can Forget Venturi Type Cold Smoke Generator
Venturi type design is nothing but to introduce extra fresh air to cool down temperature of smoke.
Now you can build a cold smoke generator by using two fans.
One is for burning wood, the other just blows fresh air into smoking cabinet.
Just find a metal pipe, fill it with saw dust, blow from one side, the other side is inserted into smoking cabinet. Then it is smoking generator
In your WSM, just put a can on top of one air inlet, fill the can with saw dust. Then it is a smoke generator. Insert second fan to another air inlet, it simply blows fresh air to WSM to lower the temp. It is easy to do it in UDS too.
04-06-2014, 10:09 AM
BGE accelerator uses 8 batteries.
If you want to use battery too, you can buy battery from eBay.
12 VDC 2400 ma.h Li-ion battery is around $10, charger is around $5.
If you want to use battery other than AC/DC adapter, I can send you free connector to fan.
04-06-2014, 07:30 PM
It is indeed more a power draft, fan speed adjustable by hands
04-06-2014, 08:45 PM
ID's here can buy this system @ $20, free air mail.
If you have interest, please follow this post, and I will give you my paypal account.
If you do not want to leave your ID here, you can buy from my eBay store directly http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=141247864476&ssPageName=STRK:MESE:IT
But you need to pay full price of $39.80
04-06-2014, 09:30 PM
I would like to order one. Tell me what to do.
04-08-2014, 04:23 AM
I want one as well. I think I can adapt it to my cold smoke generator.
04-08-2014, 11:53 AM
Has anybody used any of these controllers with an Akorn Kamado? I believe it has a very narrow opening and I want to know if there is an adapter to ft. Thanks
04-08-2014, 05:48 PM
The diameter of thread is 20 mm or a little bit bigger than 3/4" inch.
I send you a flange of 81x50mm, which is a 0.5 mm metal sheet.
You can cut it by scissors to fit your smoker.
As long as opening is bigger than 20mm, it works.
vBulletin® v3.8.7, Copyright ©2000-2014, vBulletin Solutions, Inc.
Copyright ©2000-2014, The BBQ Brethren Inc. All Rights Reserved