PDA

View Full Version : Attention please, buyers of wGrill V1, Please contact me for free V2


woodpelletsmoker
01-26-2014, 12:23 AM
Now 50 pieces of wGrill V2 are ready.
I will give free V2 to all old buyers of V1.
Due to virus I lost buyer list in my computer.
All old buyers, Please contact me.
So far I get contact of 4 old buyers only, and I have sent out the 4 pieces

Pole D
01-26-2014, 11:54 AM
Hi - I purchased the wGrill v1. On Jan 22, 2014 I paid the $1 for wGrill v2 using the link you provided in the other thread.

Please let me know if I need to do anything else.

woodpelletsmoker
01-26-2014, 07:38 PM
Checking your eBay account please , I sent already

woodpelletsmoker
01-26-2014, 08:32 PM
Senior, Junior and wGrill V2 use same probe.

wGrill V1 uses same probe but with different wiring.
If you want to use probe of wGrill V1 on Senior, Junior and V2, you need to re-solder as below.
http://www.wgrill.us/PT100-Wire.jpg

Will work for bbq
01-31-2014, 04:58 PM
Thanks Wang I just received V2 today. Is there a user manual for making the settings? I tried the V1 manual but the buttons and parameters are different.

woodpelletsmoker
01-31-2014, 11:25 PM
http://allchinas.com/wgrill/wifi-life-manual1.jpg
Light:
LINK:If light ON, WIFI is normal
ALARM:High/Low temperature alarm
IN1:Probe #1,
IN2:Probe #2
Buttons:
POWER:Power on/off
SET:Function #1, program alarm,
Function #2, set WIFI Setup
↑ Function #1: set data
Function #2: showing in C/F option
↓Function #1, program alarm,
Function #2, option of probe #1, or #2
OK:Function #1: confirm,
Function #2, Alarm sound Off

Alarm Set:
Press "IN" to let "IN1" on set Probe #1
Press "SET"
use buttons of "↑" and "↓" to change data of digital #3,
press "OK" to save digital #3
use buttons of "↑" and "↓" to change data of digital #2
press "OK" again to set digital #2
press "OK" third time to set digital #1.
Low temp. alarm is done
press "OK" 4th time to set digital #3
press "OK" 5th time to set digital #2
Press "OK" 6th time to set digital #1
High temp. alarm is done

Press "IN" to let "IN2" on.
repeat above steps to set probe #2

Search WIFI signal of hl-link in your computer and smart phone and connect it,
visit http://192.168.01 to find following temp.-time curve

http://allchinas.com/wgrill/wifi-life-manual2.jpg
You can select showin of present temp.-time curve,the real, or
the past temp.-time curve, the history
Also you can select showing in F or C

http://allchinas.com/wgrill/wifi-life-manual3.jpg
Press "POWER" to turn off
Press "SET" and hold till appearing "----"
Search WIFI signal of "hl-link" by computer, and conenct it
from browser to visit http://192.168.0.1
to press "Resum" to enter setup page


http://allchinas.com/wgrill/wifi-life-manual4.jpg
Setup of direct visit from computer or smart phone
WPA2/AES SecuKey needs at least 8 digitals
press "SAVE", LINK light will off, and the on again
Search WIFI signal of "hl-link" from computer and connect it
in brower, visit http://192.168.0.1

http://allchinas.com/wgrill/wifi-life-manual5.jpg
Setup of accessing Router
About IP address:
address of TP-LINK Router usually is 192.168.1.1,
first 3 data of wGrill IP address must be same as Router.
say 192.168.1.10
address of D_LINK Router usually is 192.168.0.1,
then you need to set wGrill IP address as
192.168.0.x,say 192.168.0.10;
Netmask usually is 255.255.255.0
press "SAVE", "LINK" light will be off and then on later.
enter Router and you can visit http://192.168.1.10   

Boss Hoss
12-01-2014, 10:44 PM
Hi,

Just a heads up that I'm selling my extra wGrill on eBay with no reserve. Check out my auction and good luck!

http://www.ebay.com/itm/331400654764

- Boss

Porcine Perfection
12-02-2014, 12:27 PM
Hi,

Just a heads up that I'm selling my extra wGrill on eBay with no reserve. Check out my auction and good luck!

http://www.ebay.com/itm/331400654764

- Boss

Is it ver.2?