PDA

View Full Version : Next Model out Revers Flow Pellet


smokinit
12-05-2013, 01:04 PM
Ok guys I have a few being made as we speek should be out in mid January. They will have a spot to put extra wood for increased smoke flavor high end components custom made heavy duty auger and burn pot for very long life. For those of you who own a Humphrey unit now you now it will be very strong!! Pm me or call me if you would like additional info on these.
518 488 1015
Kevin

scm1226
12-05-2013, 02:10 PM
Am igoing to wish I ordered this on? Hahah

EJHOFFY
12-05-2013, 02:17 PM
Kevin, can you explain a little bit more. Will this unit fit into a G2 unit ?

smokinit
12-05-2013, 02:24 PM
Kevin, can you explain a little bit more. Will this unit fit into a G2 unit ?


Its not just the controls and auger its the entire smoker

Untraceable
12-05-2013, 03:56 PM
I dont know how I feel about this bud. Is the force within Humphreys strong enough to cancel out the evil of pellets?
:drama:

smokinit
12-05-2013, 03:58 PM
I dont know how I feel about this bud. Is the force within Humphreys strong enough to cancel out the evil of pellets?
:drama:

I know but it if you can combine the ease of pellets and make it cook as good as with coal it will be hard to beat.

smokinit
12-05-2013, 05:04 PM
Am igoing to wish I ordered this on? Hahah


I can switch it for you:becky:

Untraceable
12-05-2013, 05:37 PM
If there going to be reverse flow too, that may help with the typical lack of smoke flavor from pellets

smokinit
12-06-2013, 07:34 AM
I like new toys can't waite to play with this all winter:clap2:

Dex
12-06-2013, 07:47 AM
Damn I may have considered this. Should have known it was coming since Backwoods is getting ready to release theirs as well.

Is the pellet option going to be added to each model? Whats next? Gravity Feed?

smokinit
12-06-2013, 07:58 AM
Damn I may have considered this. Should have known it was coming since Backwoods is getting ready to release theirs as well.

Is the pellet option going to be added to each model? Whats next? Gravity Feed?


I would say the Half Pint may be to small to put it on it should be able to be put on all present models. Gravity feed well I dont know about that:becky:

Dex
12-06-2013, 08:00 AM
They have any type of pricing put together on them?

smokinit
12-06-2013, 08:01 AM
They have any type of pricing put together on them?

Right now they are just priced per order no broad based pricing yet.

smokinit
12-06-2013, 08:53 PM
Mine will be a Cubed Beast with full SS cook chamber and shelves.

MarleyMan
12-06-2013, 10:11 PM
Mine will be a Cubed Beast with full SS cook chamber and shelves.

That will be NICE :thumb:

smokinit
12-07-2013, 02:38 PM
It should be a smoking machine

IamMadMan
12-07-2013, 08:18 PM
Mine will be a Cubed Beast with full SS cook chamber and shelves.

Sounds like a dream come true..... LOL

sdgoodspeed
12-08-2013, 05:07 AM
Well, this is a probably obvious but I'll ask anyway since I don't know, but what is the advantage of using pellets versus charcoal in an insulated cabinet? If it is mainly a heat source (and here, I may be wrong...) then is there an advantage over charcoal in that respect or is there a flavor component? I'm trying to understand the feature/benefit of a pellet cabinet versus charcoal cabinet with a Guru? I had though the pellets were mainly a set and forget option. I'm sure I'm missing something, any help is appreciated. I'm not asking about which is better by the way, just trying to get a handle on the pros/cons of this.

Sammy_Shuford
12-08-2013, 08:56 AM
Pellets are a fuel source. Yes, most are set and forget,

But many charcoal units become set and forget with Stokers and other automated controllers.

Advantage? My wife can push two buttons and cook ribs. Me, I can cook ribs in either of 4 other units.

Notice I said cook, I still do the prep!

sdgoodspeed
12-08-2013, 09:18 AM
Well, that's a good point! Ok, so it really is more of the convenience - lack of handling coals and hot coals/chimney, etc. I guess cleanup could be less? Don't know. Ok, well, that makes sense anyway. Thanks.

Untraceable
12-08-2013, 09:31 AM
just easier to cook with. If thats possible..

sdgoodspeed
12-08-2013, 10:09 AM
Again, no experience, but assuming a 4 or 6 hour cook at 250 or something like that, really prefer to cook at 275-300 but for comparison is it more expensive to use a load of charcoal or a pellets? There's probably a thread somewhere, I'm just trying to analyze this whole charcoal versus pellets deal. Not sure how hot and fast would work with pellets as far as expense, too.

smokinit
12-10-2013, 01:11 PM
Ok a little update looks like we will have two pellet component options one will be high end made for daily use{ Catering, Restaurants, or a rigorous competition schedule} and a standard model for the backyarder and weekender schedule. Pricing should come along shorly.

early mornin' smokin'
12-10-2013, 03:22 PM
definitely want some info. We were almost ready to pull the trigger on a pair of FEC-120's....but i'm interested to hear more.

Shiz-Nit
12-12-2013, 11:59 AM
Any update on the pellet unit yet?

smokinit
12-12-2013, 01:06 PM
Still getting all the figures together so we can get pricing out shouldn't be to much longer.

Shiz-Nit
12-12-2013, 01:42 PM
Still getting all the figures together so we can get pricing out shouldn't be to much longer.

Any photo's yet? we may add a pellet smoker in for next years season. It would be nice if I could add a pellet hopper to my backwoods competitor.

smokinit
12-12-2013, 01:49 PM
Any photo's yet? we may add a pellet smoker in for next years season. It would be nice if I could add a pellet hopper to my backwoods competitor.


This will be complete smokers not just the pellet unit for add ons to existing units.

speedrcer1
12-14-2013, 03:22 PM
Sounds awesome!

plowin-fire
12-29-2013, 07:40 PM
Waiting...:rolleyes:

smokinit
12-29-2013, 07:43 PM
Waiting...:rolleyes:

Yes dear its coming along:wink:

plowin-fire
12-29-2013, 07:54 PM
So what's the cost comparison to run this one vs a standard model? I love my beast, but it's hungry...

smokinit
12-29-2013, 08:10 PM
So what's the cost comparison to run this one vs a standard model? I love my beast, but it's hungry...

I wont have that unitl I get one in hand and do some cooks on it.

fireman_pete
12-30-2013, 01:05 AM
Would love to get some specs and prices when they are available.

Thanks!

Pete

smokinit
12-30-2013, 04:02 AM
Would love to get some specs and prices when they are available.

Thanks!

Pete

Ok you got it

Shiz-Nit
12-30-2013, 03:18 PM
Would love to get some specs and prices when they are available.

Thanks!

Pete

Me too

smokinit
12-30-2013, 06:57 PM
Me too

You got it

smokinit
01-10-2014, 08:25 PM
ok its getting closer just a few weeks now.:clap2:

BMerrill
01-14-2014, 11:01 AM
You may consider having Pelletheads.com do a performance test. It doesn't cost anything except shipping the cooker to them. They have tested a lot of pellet grills. Contact Larry on the website.

smokinit
01-15-2014, 06:45 PM
You may consider having Pelletheads.com do a performance test. It doesn't cost anything except shipping the cooker to them. They have tested a lot of pellet grills. Contact Larry on the website.

I can look into it do you know off hand were it would go

Ron_L
01-15-2014, 06:52 PM
You could send one to an experienced pellet cook, competition cook and coffee roaster in the Chicago area and he could do a thorough test in the field and post the results right here on the good ol' BBQ Brethren.

I might know someone. And it's not Scottie :-D

smokinit
01-15-2014, 06:55 PM
You could send one to an experienced pellet cook, competition cook and coffee roaster in the Chicago area and he could do a thorough test in the field and post the results right here on the good ol' BBQ Brethren.

I might know someone. And it's not Scottie :-D

What took you so long to chime in.:heh:

smokinit
03-09-2014, 02:56 PM
We are getting close some parts got held up for a time. Back on track soon.