PDA

View Full Version : Do you need to add a Spit Rotisserie in your offset


woodpelletsmoker
11-05-2012, 01:15 AM
http://allchinas.com/spit/roaster8eBayA.jpg
http://allchinas.com/spit/roaster1eBay.jpg
http://allchinas.com/spit/roaster3eBay.jpg
main skewer length is 48" inches.
Three skewers design can hold food easily and securely
Motor is 110VAC or 230 VAC, can turn 80 lbs load on rotisserie
Price is $200, free surface mail to north American
You need only to drill two holes of  3/8" inches at both ends

You can add a small one on your weber also.
main skewer length is 24" inches.
Three skewers design
Motor is 12 VDC , can turn 30 lbs load on rotisserie
Price is $80, free surface mail to north American

What is your comment

woodpelletsmoker
11-05-2012, 01:22 AM
I have reverse flow offset wood pellet smoker.
I measure temperature at different points.
Upper part, lower part, left side and right side have different temperatures.
Reverse flow can reduce difference from left to right sides.
Spit Rotisserie is a great help too.